I purchased a home with saltillo clay tiles. Extremely worn, some still have a glazing on them, others wearing or worn down exposing clay. Can I pain ...
Long post sorry, I'm trying to pin down a budget and timeline.
I recently bought an old unit built around the late 60s early 70s. Because of the age ...
Using this mesh wire panel, I want to attach something to the bottom of it, to act as its feet/stand. I can’t find anything at Bunnings to do this, bu ...
Hi troop,
We recently had the wall between a bedroom and its dressing room opened up (our son didnt require 4m of hanging space!!!) - and concerningl ...
Hi,
I would to to remove these aluminium bi-folding doors completely. I know how to remove the doors itself but not sure how to remove the bottom f ...
Planning to add 6 POE cameras on below spots (marked in numbers) around my GF home (2 storey).
Any suggestions or changes required on the spot and wha ...
Hi Community,
We have recently purchased a property and we are thinking about what we can do with this fireplace: Ideally we would like to remove the ...
I am attempting to build a custom office/office desk from the 32mm thick custom Bunnings kitchen benchtop range. I'm going to ask to get the Bunnings ...
Hi all, we are wanting to paint our aluminium window frames as they’re currently green and the paint is chipping away. we just bought this house so we ...
My corner stacker door (double glazed) bottom frame height is 40mm above the level of finished indoor tiled flooring
I feel 40mm is too much and will ...
My wife and I started this project and it took us 2 weeks to finish (due to commitment towards our full time job and of course kid too). We both are v ...
I had a lockable window winder that needed to be replaced. The issue was that it was stuck in the closed position. Which meant I couldn't unwind the c ...