I have watched many YouTube clips and now want to see if anyone here has any experience bending a curve in LVP.
I have 15 stairs with bullnose fronts ...
I am doing a makeover on my bathroom vanity and there is some lifting of the vinyl wrapping, looking for recommendations on the best glue to use to st ...
I have stripped back and sanded a few pieces of timber furniture. I am wanting to keep the raw timber finish/colour. I bought Bunnings soft wax (clear ...
I'm having trouble removing these door handles for painting, I believe the gold base plate screws off on one side (there's no hole with a pin and the ...
Are the Smart dimmers & Smart switches troublemaker for lights, GPO, fans over the period.
even brands like Clipsal, Mercator have bad reviews.
I thou ...
Hello, We have a dark water stain in our wood floor from indoor plant pot. I have tried to clean it wit a little bit of bleach still no luck. Much app ...
I bought some Claymark Premium Pine panels from Bunnings. Can you advise which size and type nails I should use to attach them to 35mm thick pine tim ...
This is my third go at trying to post, website it keeps reloading mid post.
Paint job is too big and I'm getting conflicting advice on how to solve ...
Rodents are finding their way into our home. They’ve created holes themselves by chewing their way through the bottom of a door (through the rubber st ...
My wife and I started this project and it took us 2 weeks to finish (due to commitment towards our full time job and of course kid too). We both are v ...
I had a lockable window winder that needed to be replaced. The issue was that it was stuck in the closed position. Which meant I couldn't unwind the c ...